Contact Us
Add: Block 5, Fuqiang Technology Park, Zhugushi Road, Wulian, Longgang 518116
Mob: +86-13570825960
E-mail: info@panadisplay.com
122x32 LCD Display Module Graphic ST7920 Yellow green Backlight
Product Details
General Specification
NMLCD-122X32Z-1 is 122x32 lcd display module graphic, ST7920 or equivalent controller, yellow green led backlight, compact size, wide temp, 3v power, stn gray color.
Product Description
Glass mode | STN |
lattice | 122x32 |
Outline size | 84.0X44.0X12.8(mm) |
Location size | 77.0X38.75(mm) |
WxHxT | 80.0x18.5(mm) |
Driver | ST7920 |
Technology | COB |
Interface type | On the left by the left out 24pin 2.54 pin |
backlight | Yellow led backlight |
data transmission | Serial, parallel port compatible, 8 bit bidirectional data bus, can correspond to 80 and 68 series of MPU respectively |
External Dimensions
Display Image
Application
PANASYS Factory
Packaging & Shipping
Packaging: Cartons, Cupboard, EPE, Blister Tray, about how many products in one package, it is up to the size of products, according to customer request.
Shipping: Express way as DHL, Fedex, EMS, UPS, air shipping, sea shipping, any shipping method you prefer.
FAQ
1. I want the LCD module display 8 digits and the outline size is 65x30x2.8mm………?
Answer: No problem. Firstly ,pls send us your drawing paper or samples; we will introduce the suitable one if it is standard products. Or we can modify based on one of it.
2.This LCD module is just what we want, but it is big size, do you have any smaller size? And the display content need to be changed a little.
Answer: For the segment type LCD module, if you need modify the outline size or display content, a new LCD glass module is need. We will inform you of the mould charge after confirming when payment, we will start the drawing paper for your checking.
3. This LCD module backlight is yellow-green, but I want blue backlight.
Answer: No problem, we can change for you.
4. I want customize a new LCD module. Can you do?
Answer: Yes, we can. Please send your drawing paper. If you have not, please tell me the outline size of the LCD display, display information, if need backlight or PCB board with IC, We will evaluate the cost and give you price soon.
5. What is leading time for tooling?
Answer: 15 to 30 days after drawing paper confirmation and tooling charge payment, we can tell you the exact time when you confirm the drawing paper.
6. Can you send us samples for checking?
Answer: Yes. Samples order is available.
7. What is the Leading Time?
Answer: If we have stock for the standard ones, the leading time is one day after payment. If it is the mass production for special ones, the leading time is about 15-30 days. If we can finish earlier, we will send you information in advance.
